|Input 1 to Selected Line Out and Speakers||Frequency Response: +0, -0.5dB from ＜10 Hz to ＞80 kHz|
THD+N: ＜ 0.0025% @+4dBu
IMD (SMPTE): ＜ 0.0025% @ +4dBu
Crosstalk rejection: ＞108dB
Noise: ＜ -93 dB, unweighted
NOTE: Speaker outs can run at -6dB (factory setting) or unity gain (remove jumpers 3 and 4)
Maximum input level: ＞ +26 dBu
|Input 2 to selected line out and Speakers||Frequency Response : +0, -0.5dB from ＜10 Hz to ＞80 kHz|
THD+N: ＜ 0.0025% @ +4dBu
IMD (SMPTE): ＜ 0.0026% @ +4dBu
Crosstalk rejection: ＞ -98dB
Noise: ＜ -90 dB, unweighted
NOTE: Input 2 can run at -10dBV or -16dBV (by setting JP1 and JP2. Remove for -10dBV)
Default factory setting is -16dBV to accommodate 1/8” headphone outputs of iPhones and cell phones
Frequency Response: +0, -0.5dB from ＜10Hz to ＞50kHz
|Outputs||The meter and speakers outputs are fully balanced and 600 ohm drive capable to ＞+26dBu.|
Volume knobs track better than +- 0.5dB from unity to -40dB.
The headphone amp can easily drive several sets of cans.
Maximum output level: ＞ +26 dBu
Shipping weight (in carton): 7 lbs.
Dimensions: 12 3/4" Wide x 8" Deep x 1 5/8" High
|Digital inputs||The AES inputs lock from 32kHz to 192kHz sample rates with the following: ＜0.004% THD+N|
-0.2dB at 10 Hz and 22kHz (48kHz sample rate)
-0.2dB at 10Hz and 34kHz (higher rates)
Crosstalk Rejection: ＞103dB
Power Supply: 12 volt, 2 Amp (Part number PSU-SRC)
Optional Rack Kit: SRC (Source Rack Kit), $49.99
|USB Compatibility||Mac: Requires Mac OS 10.6 or higher for driverless plug and play|
PC: Requires a driver for Windows operating systems up to Windows 7.